- Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
- 22mm steel tube with 2mm wall thickness.
- Less is more – One of our goals was to preserve the low center of gravity of the T7 so we kept it simple and lightweight!
- Tough mounting points – No cutting corners here (either)! We used precise laser cut pieces for perfect fitment using 4mm and 5mm thick metal mounts. These parts absorb the impact from drops and tip overs instead of your bike’s chassis.
- Powder coated – Combined with sandblasting, it’s a killer combination to protect the product’s surface. No frills, and tough just like your T7!
Compatibility
Compatible with 2019-2024 all models*.
Note*: The Tenere 700 Extreme mudguard needs to be lowered by 3mm/4mm for our crash bars to fit at the top near the headlight. You will need a couple of washers (not provided) in order to create enough of a gap to fit them.
Compatible with OEM equipped skid plate.
Compatible with OEM ‘Rally’ optional skid plate with these minor modifications.
Confirmed to be compatible with SW-Motech, ACD Racing, and Camel ADV skid plates.
Martin A. (verified owner) –
Nigel Crate (verified owner) –
Great sturdy bars love the colour well made hope to never have the need to test them
Arron S. (verified owner) –
Excellent product and fitting instructions.
Alessandro Ghiretti (verified owner) –
Gordon Simm (verified owner) –
Solid, well made and thought through
Jason McMahon (verified owner) –
There were no instructions in the box and by that I mean a parts list and torque settings. I say this as I found the stock Bolts into the frame on the bottom bars were to short, but there were extra bolts in the box but no mention if they were a suitable replacement.
I had watched the video but it is not suitable way to relay instructions.
I know it is a simple job but some of the bolts were to short on one side as I had to put the upper bars in the vice to manually adapt them. Not good as I have had to go out and purchase longer bolts, but as there was no parts list I have no idea if there M8,M6 or M10
Lorant (store manager) –
Thank you for your feedback about our Yamaha Tenere 700 crash bars.
How did you not find the video installation instructions detailed enough? We literally show every step as we installed the lower and upper crash bars.
Also, about the 12mm diameter bolts: If for some reason you didn’t find them in the package we can send them to you free of charge. They’re longer than the OEM ones. It’s also mentioned in the video.
The torque specs are mentioned in the video as well as the parts and hardware list and the recommended tools.
Søren Larsen (verified owner) –
Good good product, and looks awesome on the bike. And fast delivery. Thanks
miikka.leino (verified owner) –
Good solid and sturdy setup (lower bars)!
Good customer service; I wanted to have lower bars without upper bar attachments and that was sorted with no effort.
Only negative feedback comes from instructions. I do have to agree with Jason, that instructions are a bit vague. Video does go thru the whole process but it’s 25min long. 🙄
Also one has to figure out on his own which replaced bolt goes to which side, video doesn’t mention that. (Different length bolts left and right) Mechanics hand is pointing to one bolt while he is talking about another bolt and so forth.
If the torques are mentioned (in English) on video…I did not catch them even thou went thru it twice doing my best to skip Italian commenting.
Don’t get me wrong; still an easy task to do but with little effort the instructions could be way better.
Top notch product, I do recommend,
Sami (verified owner) –
I bought only the lower crash bars. I think they give the needed protection. The left side was easier to install, the right side required some force to get all the pieces together. All the bolts and washers should be black. And the bolts on the lower connection bar just a bit longer. I think these are the best looking crash bars on the market.
Lorant (store manager) –
Thanks for your feedback! Bolts tend to be a sensitive topic. We used to supply black bolts, some people complained about the colour. Now we supply these shiny galvanized bolts and some people dislike them. Catch 22.
Andy (verified owner) –
supersolid. matching well to the bime and my needs when i travel
erman82 (verified owner) –
I am happy with this crash bar because it is look nice and do it job succesfully ı tested 40km on the gravel without any damage and problem on my bike thanks…also I like skid plate👍 @hititenduro
Marco (verified owner) –
+ Nice Product, really like the crash bar design (silver)
+ general quality and packing of goods
– silver color does not match de handlebar color 100%
– accuracy of fit is ok, right side bracket (connecting bracket of lower / upper part) does not align perfectly, but once all the screws are tight it seems to be fine
Lorant (store manager) –
Thanks for your feedback. We constantly test fit our Tenere 700 crash bars. As long as the recommended lose fitting technique is applied, the installation is a breeze.
We don’t colour match the silver with anything on the bike, especially the handle bars. There’s also a disclaimer that we don’t guarantee colour matching at all, unless specified otherwise.
Charles O. (verified owner) –
Strong and solid, fitted very well to the bike. Hopefully never required but at least if they are I know they will protect me well.
meni menashse (verified owner) –
Anonymous (verified owner) –
I only wondered why there was not OM stickers at all…?
Lorry (store manager) –
We probably had none in stock. I’ll arrange a kit for you.
Stan Marius (verified owner) –
Ran (verified owner) –
Everything great except Israel customs not related to you of course
Alexandros Karavias (verified owner) –
Very nice handcrafted and nice comunication between me and Lorry compos the founter of the company.
Oz Falah (verified owner) –
Domas (verified owner) –
Really sturdy and well made product if to compare with crashbars on my other bikes. After quite serious crash test they stayed in place
Krisztián B. (verified owner) –
I would highly recommend it to anyone. Material use, durability and protection are also at a high level.
Norbert (verified owner) –
I actually wanted crash bars in black because my Ténéré 700 is black. But when I ordered, black wasn’t available, so I bought the red ones and thought I’d just spray them black myself. Now they are red on the matt black T7 and I have to say I like it!
The shipping from Hungary to Switzerland was absolutely great, very fast and reliable.
I think it’s bad that there are no assembly instructions in paper form. Not everyone has access to YouTube in their basement—Yamaha for example, does a much better job with its OEM instructions …
The workmanship of the crash bars is very good. However, I can’t judge how strong the crash bars really are, as I haven’t crashed since they were fitted. But based on the design features, I think they can withstand a lot more than the OEM version! Above all, the much better extra lateral support probably makes a big difference … That was also the main reason for buying the Outback Motortek’s. The OEM’s were unusable after a slight slip on ice.
Lorry (store manager) –
Thanks for your feedback, Norbert. Our YouTube installation videos can be downloaded on mobile devices, so you can play the video without internet access. The installation process of our crash bars can be difficult and putting all the steps on paper would make it a few pages. We used to offer printed manuals, but the questions regarding certain details were simply overwhelming. Ever since we switched to videos only we barely get installation related questions. We can even include extra tips and tricks in our videos.